Gridfinity Label Maker

Turn a parts list into labels for your Gridfinity bins. Paste rows from a spreadsheet or an order page, pick your label maker, and download one image for each label.

Open the label maker →

How it works

  1. Type your list, or paste rows from a spreadsheet or an order page.
  2. Pick your label maker and the tape or labels in it.
  3. Check each label in its preview, then download the images and print them from your printer's app.

Label makers

Label maker Tape or labels
Brother P-touch 6, 9, 12, 18 and 24 mm tape
DYMO LabelManager 6, 9, 12 and 19 mm tape
Niimbot D11 and D110 12 × 22, 12 × 40, 14 × 40, 15 × 30 and 15 × 50 mm labels
Phomemo D30 12 × 40 and 14 × 30 mm labels

Each image has one pixel for each dot of the printer's head, in black and white, so small text prints sharp.

Paste a parts order

When you paste rows, the label maker finds the column of part numbers. Each part number prints on a second line, in a font where 0 and O look different. On 6 mm tape, the part number prints after the description, on the same line and in the same font. A typed line that starts or ends with a McMaster-Carr part number, such as 91290A113 Socket head screw, works the same way. The label maker does not look up part numbers, so paste the descriptions with them.

Sized for your bins

Tape labels can fit their text, or match the width of a bin 1, 2 or 3 grid units wide: 36, 78 or 120 mm. Long descriptions wrap onto two or three lines to fit.

Print the labels instead

To print a label as part of the bin, use the bin designer. It prints text on label tabs, or makes swappable label plates that click into the bin. With a plate, you change a label without a new bin.

More detail is in the label maker docs.

Frequently Asked Questions

Can it look up McMaster-Carr part numbers?
No. Paste the description with each part number, for example from your order history or a spreadsheet. The label maker puts the description on the label and the part number on a second line. On 6 mm tape, the part number goes after the description, on the same line.
Which label makers does it support?
Brother P-touch tape from 6 to 24 mm, DYMO LabelManager tape from 6 to 19 mm, Niimbot D11 and D110 labels, and Phomemo D30 labels. Each label downloads as an image you open in your printer's app.
Do I need to plan a layout first?
No. The label maker opens on its own page. Type or paste a list and download the labels.
What do I download?
One PNG for each label, sized in your printer's dots and in black and white. More than one label downloads as a ZIP.
Can I 3D print the labels instead?
Yes. The bin designer can print text on a bin's label tab, or make swappable label plates that click into a socket on the bin.